Cassava peeler is mainly used for removing outer peels and subcutaneous cuticle of cassava roots, which can be used in the cleaning section of the raw material to realize the removal of the raw material peel. Therefore, the equipment has better industry practicability. Cassava peeler is used in the process of garri production line and cassava chips and cassava flour processing. It is made of stainless steel. It has different models depending on the quantity of products.
DOING cassava peeler
How do the cassava peeler machine run?
The series of this cassava peeler fully draws on the advanced technology worldwide and have been developed in combination with our company's years of equipment production experience. The machine consists of frame assembly, screw spindle assembly, spindle driving device, brush rod assembly, brush rod drive device, external protection device (selection), sediment collection device (selection) and so on. The raw material to be cleaned is dropped from the feeding port at one end of the equipment. The bottom of cassava peeler is comprised of the brush rod with certain clearance. The brush rod is arc shaped, each of the brushes has a sprocket drive input device at one end. The device of the brush rod drives the brush bar to rotate in the same direction through the chain wheel and the chain, so that the material epidermis can be removed without pause. When the brush stick moves in the same direction, it will also realize the high displacement of the material. When the material reaches a lofty position, it will fall naturally due to gravity, so the material is redirected to the cloth on the brush, and the peeling action of different positions is started. Owing to the clearance between adjacent brushes, the removed epidermis and other debris can be discharged out of the equipment in time.
Cassava peeler details
Technical parameters of DOING cassava peeler:
In the center of the arc, there is a screw spindle device. On the main shaft of cassava peeler, there is a spiral blade. Under the drive of the spindle, the material can be pushed forward to the direction of the outlet continuously, thus the continuous operation of the equipment is realized. The cassava peeler can be equipped with spray water device according to the technological needs, so as to remove impurities from the epidermis and brush stick in time. The machine is simple in structure, stable and reliable in operation, heavy in handling capacity and simple in maintenance. It is an ideal equipment for cleaning and removing impurities of tuber crop. The machine adopts high quality domestic brand, and the transmission is chain drive, which is simple and convenient to maintain. Besides, the operation is simple and easy to learn.
Welcome to DOING
The features of our cassava peeler:
1.It is made by stainless steel and can remove the peel completely and effectively. The cassava peeler peeling rate can reach 95%
2.Optimal design for complete machine with good-looking .
3.Dealing with large and medium quantity with consuming low power
4.Easy for installation and matainence
5.It also has nice appearance, well matched motor configuration
Leave a message
- How to maintain cassava starch processing equipment ?
- How to extract cassava starch ？
- How to make cassasva starch?
- Water, electricity, steam and land deploy in starch processing plant
- How profitable is cassava starch made?
- Cassava mechanised garri processing
- What does cassava processing plant to do?
- Dry cassava chips processing
Leave a message